Alloy Servo Arm Heavy Duty 24 Tooth spline for HSP, Wind Hobby Hitec servos

Used for high torque steering servos from HSP or Hitec which use a 24 tooth spline. Secured using 2 set screws to clamp to servo shaft.

Two output holes are threaded M3 to take ball joint fixings and are spaced at 20mm and 24mm from centre.

    Overall Length: 35.5mm
    Centre to end dimension: 28mm
    Centre to holes: 20mm and 24mm
    Height: 6mm
    Max Diameter: 15mm at centre.
    Arm width at end: 8mm
    Spline diameter: 5.6-6mm
    Colour: Blue